ANSI标准目录3

ANSI-NCITS-TR-25 INFORMATION TECHNOLOGY - FIBRE CHANNEL - METHODOLOGIES FOR JITTER SPECIFICATION
ANSI-INCITS-230 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL AND SIGNALING INTERFACE (FC-PH) - REPLACES ANSI X3.230-1994; AMENDMENT 1: 1996 (R2001); AMENDMENT 2: 1999
ANSI-INCITS-297 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL AND SIGNALLING INTERFACE-2 (FC-PH-2) - REPLACES ANSI X3.297-1997
ANSI-INCITS-349 INFORMATION TECHNOLOGY - FIBRE CHANNEL - SINGLE-BYTE COMMAND CODE SETS MAPPING PROTOCOL-2 (FC-SB-2) - REPLACES ANSI NCITS 349-2001
ANSI-INCITS-355 INFORMATION TECHNOLOGY - FIBRE CHANNEL - SWITCH FABRIC - 2 (FC-SW-2) - FORMERLY ANSI NCITS 355-2001
ANSI-INCITS-384 INFORMATION TECHNOLOGY - FIBRE CHANNEL - SWITCH FABRIC - 3 (FC-SW-3)
ANSI-INCITS-339 INFORMATION TECHNOLOGY - FIBRE CHANNEL - VERY LONG LENGTH OPTICAL INTERFACE (SM-LL-V) - REPLACES NCITS 339-2000
ANSI-INCITS-357 INFORMATION TECHNOLOGY - FIBRE CHANNEL - VIRTUAL INTERFACE ARCHITECTURE MAPPING PROTOCOL (FC-VI)
INCITS-364 INFORMATION TECHNOLOGY - FIBRE CHANNEL 10 GIGABIT (10GFC) - REVISION 3.2
ANSI-INCITS-332 INFORMATION TECHNOLOGY - FIBRE CHANNEL ARBITRATED LOOP (FC-AL-2) - REPLACES ANSI NCITS 332-1999; AMENDMENT 1: 2003
ANSI-INCITS-342 INFORMATION TECHNOLOGY - FIBRE CHANNEL BACKBONE (FC-BB) - REPLACES ANSI NCITS 342-2001
ANSI-INCITS-303 INFORMATION TECHNOLOGY - FIBRE CHANNEL PHYSICAL AND SIGNALLING INTERFACE-3 (FC-PH-3) - REPLACES ANSI X3.303-1998
INCITS-404 INFORMATION TECHNOLOGY - FIBRE CHANNEL PHYSICAL INTERFACES (FC-PI-2) - REVISION 10.0
ANSI-INCITS-350 INFORMATION TECHNOLOGY - FIBRE CHANNEL PROTOCOL FOR SCSI, SECOND VERSION (FCP-2)
ANSI-INCITS-248 INFORMATION TECHNOLOGY - FIBRE DISTRIBUTED DATA INTERFACE (FDDI) - ABSTRACT TEST SUITE FOR FDDI PHYSICAL LAYER PROTOCOL CONFORMANCE TESTING (PHY ATS) - REPLACES ANSI X3.248-1996
ANSI-INCITS-255 INFORMATION TECHNOLOGY - FIBRE DISTRIBUTED DATA INTERFACE (FDDI) - ABSTRACT TEST SUITE FOR FDDI PHYSICAL MEDIUM DEPENDENT CONFORMANCE TESTING (PMD ATS) - REPLACES ANSI X3.255-1996
ANSI-INCITS-278 INFORMATION TECHNOLOGY - FIBRE DISTRIBUTED DATA INTERFACE (FDDI) - PHYSICAL LAYER REPEATER PROTOCOL (PHY-REP) - REPLACES ANSI X3.278-1997
ANSI-INCITS-259 INFORMATION TECHNOLOGY - FIBRE DISTRIBUTED DATA INTERFACE (FDDI) - STATION MANAGEMENT-2 - PACKET SERVICES (SMT-2-PS) - REPLACES ANSI X3.259-1997
ANSI-INCITS-257 INFORMATION TECHNOLOGY - FIBRE DISTRIBUTED DATA INTERFACE (FDDI) - STATION MANAGEMENT-2 COMMON SERVICES (SMT-2-CS) - REPLACES ANSI X3.257-1997
ANSI-INCITS-258 INFORMATION TECHNOLOGY - FIBRE DISTRIBUTED DATA INTERFACE (FDDI) - STATION MANAGEMENT-2 -ISOCHRONOUS SERVICES (SMT-2-IS) - REPLACES ANSI X3.258-1997
ANSI-INCITS-237 INFORMATION TECHNOLOGY - FIBRE DISTRIBUTED DATA INTERFACE (FDDI) - TOKEN RING LOW-COST FIBRE PHYSICAL LAYER MEDIUM DEPENDENT (LCF-PMD) - REPLACES ANSI X3.237-1995
ANSI-INCITS-263 INFORMATION TECHNOLOGY - FIBRE DISTRIBUTED DATA INTERFACE (FDDI) - TOKEN RING TWISTED PAIR PHYSICAL LAYER MEDIUM DEPENDENT (TP-PMD) - REPLACES ANSI X3.263-1995
ANSI-INCITS-267 INFORMATION TECHNOLOGY - HELICAL-SCAN DIGITAL COMPUTER TAPE CARTRIDGE, 12.65 MM (0.498 IN), FOR INFORMATION INTERCHANGE - REPLACES ANSI X3.267-1996
ANSI-INCITS-344 INFORMATION TECHNOLOGY - HELICAL-SCAN DIGITAL TAPE CASSETTE 12.65 MM FOR RECORDED INSTRUMENTATION DIGITAL CASSETTE TAPE FORMAT - REPLACES ANSI NCITS 344-2001
ANSI-INCITS-300 INFORMATION TECHNOLOGY - HIGH PERFORMANCE PARALLEL INTERFACE - SERIAL SPECIFICATION (HIPPI-SERIAL) - REPLACES ANSI X3.300-1997
INCITS-338 INFORMATION TECHNOLOGY - HIGH-PERFORMANCE PARALLEL INTERFACE - 6400 MBIT/S OPTICAL SPECIFICATION (HIPPI-6400-OPT) - REV 2.5A
INCITS-338 INFORMATION TECHNOLOGY - HIGH-PERFORMANCE PARALLEL INTERFACE - 6400 MBIT/S OPTICAL SPECIFICATION (HIPPI-6400-OPT) - REVISION 2.5; COMMENT DEADLINE 7/22/02
ANSI-INCITS-323 INFORMATION TECHNOLOGY - HIGH-PERFORMANCE PARALLEL INTERFACE - 6400 MBIT/S PHYSICAL LAYER (HIPPI-6400-PH) - REPLACES ANSI NCITS 323-1998; AMENDMENT 1:2001
ANSI-INCITS-324 INFORMATION TECHNOLOGY - HIGH-PERFORMANCE PARALLEL INTERFACE - 6400 MBIT/S PHYSICAL SWITCH CONTROL (HIPPI-6400-SC) - REPLACES ANSI NCITS 324-1999
ANSI-INCITS-283 INFORMATION TECHNOLOGY - HIGH-PERFORMANCE PARALLEL INTERFACE - ENCAPSULATION OF FRAMES OF THE FIBRE CHANNEL PHYSICAL AND SIGNALING INTERFACE (FC-PH ENCAPSULATION) (HIPPI-FC) - REPLACES ANSI X3.283-1996
ANSI-INCITS-218 INFORMATION TECHNOLOGY - HIGH-PERFORMANCE PARALLEL INTERFACE - ENCAPSULATION OF ISO/IEC 8802-2 (IEEE STD 802.2) LOGICAL LINK CONTROL PROTOCOL DATA UNITS (HIPPI-LE) - REPLACES ANSI X3.218-1993
ANSI-INCITS-222 INFORMATION TECHNOLOGY - HIGH-PERFORMANCE PARALLEL INTERFACE - PHYSICAL SWITCH CONTROL (HIPPI-SC) - REPLACES ANSI X3.222-1997
ANSI-INCITS-284 INFORMATION TECHNOLOGY - IDENTIFICATION CARDS - HEALTH CARE IDENTIFICATION CARDS
ANSI-INCITS-83 INFORMATION TECHNOLOGY - ISO REGISTRATION ACCORDING TO ISO 2375 - ANSI SPONSORSHIP PROCEDURES - REPLACES X3.83
ANSI-INCITS-265 INFORMATION TECHNOLOGY - MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE - UNRECORDED, 36-TRACK, PARALLEL, 12.57 MM (0.495 IN), 1944 FTPMM (49 378 FTPI) GROUP-CODED RECORDING - REPLACES ANSI X3.265-1995
ANSI-INCITS-315 INFORMATION TECHNOLOGY - MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE, UNRECORDED, 128-TRACK, PARALLEL SERPENTINE, 12.65 MM (1/2 IN), 2550 FTPMM (64 770 FTPI) - REPLACES ANSI NCITS 315-1998
ANSI-INCITS-266 INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE 0.50 IN (12.65 MM), SERIAL SERPENTINE 112-TRACK, 42 500 BPI (1 673 BPMM) DLT2 FORMAT - REPLACES ANSI X3.266-1996
ANSI-INCITS-334 INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE 0.50 IN (12.65 MM), SERIAL SERPENTINE 128-TRACK, 62 500 BPI (2 460 BPMM) DLT 3-XT FORMAT - REPLACES ANSI NCITS 334-2000
ANSI-INCITS-282 INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE 0.50 IN (12.65 MM), SERIAL SERPENTINE, 128-TRACK, 62 500 BPI (2 460 BPMM) DLT3 FORMAT - REPLACES ANSI X3.282-1996
ANSI-INCITS-329 INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE 0.50 IN (12.65 MM), SERIAL SERPENTINE, 208-TRACK, 85 938 BPI (3383 BPMM) DLT5 FORMAT - REPLACES NCITS 329-2000
ANSI-INCITS-312 INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 128-TRACK, 81 600 BPI (3212 BPMM) DTLT4 FORMAT - REPLACES ANSI NCITS 312-1998
ANSI-INCITS-345 INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 208-TRACK, 98214 BPI (3866 BPMM) DLT6 FORMAT - REPLACES ANSI NCITS 345-2001
ANSI-INCITS-311 INFORMATION TECHNOLOGY - MAGNETIC TAPE FORMAT FOR INFORMATION INTERCHANGE 128-TRACK, PARALLEL SERPENTINE 12.65 MM (1/2 IN), 3400 BPMM (86 360 BPI) RUN LENGTH LIMITED RECORDING - REPLACES ANSI NCITS 311-1998
ANSI-INCITS-137 INFORMATION TECHNOLOGY - ONE- AND TWO-SIDED, UNFORMATTED, 90-MM (3.5-IN) 5,3-TPMM (135-TPI), FLEXIBLE DISK CARTRIDGE FOR 7958 BPR USE - GENERAL, PHYSICAL AND MAGNETIC REQUIREMENTS - REPLACES ANSI X3.139-1988; AMENDMENT 1: 1999
ANSI-INCITS-62 INFORMATION TECHNOLOGY - OPTICAL CHARACTER RECOGNITION (OCR) - PAPER USED IN OCR SYSTEMS - AMENDMENT 1 - MAY 24, 1999; REPLACES X3.62
ANSI-INCITS-368 INFORMATION TECHNOLOGY - PARALLEL INTERFACE PERFORMANCE (PIP)
INCITS-368 INFORMATION TECHNOLOGY - PASSIVE INTERCONNECT PERFOMANCE (PIP) - REV 4
ANSI-INCITS-226 INFORMATION TECHNOLOGY - PROGRAMMING LANGUAGE - COMMON LISP - REPLACES ANSI X3.226-1994
ANSI-INCITS-238 INFORMATION TECHNOLOGY - PROGRAMMING LANGUAGE - PL/B - REPLACES ANSI X3.238-1994
ANSI-INCITS-37 INFORMATION TECHNOLOGY - PROGRAMMING LANGUAGE APT: PROCESSOR INPUT LANGUAGE AND SYSTEM-NEUTRAL CLFILE - FORMERLY ANSI NCITS 37-1999
ANSI-INCITS-274 INFORMATION TECHNOLOGY - PROGRAMMING LANGUAGE REXX - REPLACES ANSI X3.274-1996; AMENDMENT 1: 2000
ANSI-INCITS-319 INFORMATION TECHNOLOGY - PROGRAMMING LANGUAGES - SMALLTALK - REPLACES ANSI NCITS 319-1998
ANSI-INCITS-346 INFORMATION TECHNOLOGY - PROTECTED AREA RUN TIME INTERFACE EXTENSION SERVICES (PARTIES) - REPLACES ANSI NCITS 346-2001
ANSI-INCITS-391 INFORMATION TECHNOLOGY - PROTOCOL TO FACILITATE OPERATION OF INFORMATION AND ELECTRONIC PRODUCTS THROUGH REMOTE AND ALTERNATIVE INTERFACES AND INTELLIGENT AGENT - PRESENTATION TEMPLATE
ANSI-INCITS-392 INFORMATION TECHNOLOGY - PROTOCOL TO FACILITATE OPERATION OF INFORMATION AND ELECTRONIC PRODUCTS THROUGH REMOTE AND ALTERNATIVE INTERFACES AND INTELLIGENT AGENT - TARGET DESCRIPTION
ANSI-INCITS-393 INFORMATION TECHNOLOGY - PROTOCOL TO FACILITATE OPERATION OF INFORMATION AND ELECTRONIC PRODUCTS THROUGH REMOTE AND ALTERNATIVE INTERFACES AND INTELLIGENT AGENTS - RESOURCE DESCRIPTION
ANSI-INCITS-256 INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION (RFID) - REPLACES ANSI NCITS 256-2001
ANSI-INCITS-243 INFORMATION TECHNOLOGY - RECORDED MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - SERIAL, 0.250 INCH (6.35 MM), 26-TRACK, 16 000 BPI (630 BPMM), STREAMING MODE, GROUP CODE RECORDING - REPLACES ANSI X3.243-1996
ANSI-INCITS-250 INFORMATION TECHNOLOGY - RECORDED MAGNETIC TAPE MINI CARTRIDGE FOR INFORMATION INTERCHANGE - 12/24-TRACK, SERIAL, 0.250 INCH (6.35 MM) 10,000 BPI (394 BPMM) GROUP-CODED RECORDING - REPLACES ANSI X3.250-1996
ANSI-INCITS-227 INFORMATION TECHNOLOGY - RECORDED MAGNETIC TAPE MINI-CARTRIDGE FOR INFORMATION INTERCHANGE - SERIAL, 0.250 IN (6.35 MM), 20-TRACK, 10 000 BPI (394 BPMM) AND 28-TRACK, 14 700 BPI (579 BPMM), MFM ENCODED - REPLACES ANSI X3.227-1996
ANSI-INCITS-330 INFORMATION TECHNOLOGY - REDUCED BLOCK COMMANDS (RBC) - REPLACES ANSI NCITS 330-2000; AMENDMENT 1 NOVEMBER 6, 2003
ANSI-INCITS-30 INFORMATION TECHNOLOGY - REPRESENTATION OF DATE FOR INFORMATION INTERCHANGE - REPLACES ANSI X3.30-1997
ANSI-INCITS-310 INFORMATION TECHNOLOGY - REPRESENTATION OF TIME FOR INFORMATION INTERCHANGE - REPLACES ANSI NCITS 310-1998
ANSI-INCITS-343 INFORMATION TECHNOLOGY - SCHEDULED TRANSFER - RELIABLE TRANSPORT PROFILE (ST-RTP) - REPLACES ANSI NCITS 343-2001
ANSI-INCITS-337 INFORMATION TECHNOLOGY - SCHEDULED TRANSFER PROTOCOL (ST) - REPLACES NCITS 337-2000
ANSI-INCITS-366 INFORMATION TECHNOLOGY - SCSI ARCHITECTURE MODEL - 2 (SAM-2)
INCITS-366 INFORMATION TECHNOLOGY - SCSI ARCHITECTURE MODEL -2 (SAM-2) - REVISION 24; COMMENTS DUE DATE NOVEMBER 18, 2002
ANSI-INCITS-318 INFORMATION TECHNOLOGY - SCSI CONTROLLER COMMANDS-2 (SCC-2) - REPLACES ANSI NCITS 318-1998
ANSI-INCITS-333 INFORMATION TECHNOLOGY - SCSI MULTIMEDIA COMMANDS - 2 (MMC-2) - REPLACES ANSI NCITS 333-2000
ANSI-INCITS-360 INFORMATION TECHNOLOGY - SCSI MULTIMEDIA COMMANDS - 3 (MMC-3) - ITI
ANSI-INCITS-302 INFORMATION TECHNOLOGY - SCSI PARALLEL INTERFACE-2 (SPI-2) - REPLACES ANSI X3.302-1998
ANSI-INCITS-336 INFORMATION TECHNOLOGY - SCSI PARALLEL INTERFACE-3 (SPI-3) - REPLACES ANSI NCITS 336-2000
ANSI-INCITS-367 INFORMATION TECHNOLOGY - SCSI PARALLEL INTERFACE-5 (SPI-5)
ANSI-INCITS-351 INFORMATION TECHNOLOGY - SCSI PRIMARY COMMANDS - 2 (SPC-2) - FORMERLY ANSI NCITS 351-2001
ANSI-INCITS-365 INFORMATION TECHNOLOGY - SCSI RDMA PROTOCOL (SRP)
INCITS-365 INFORMATION TECHNOLOGY - SCSI RDMA PROTOCOL (SRP) DEVELOPMENT WORK CONDUCTED IN T10-I/O INTERFACE - LOWER LEVEL - REV. 16A
ANSI-INCITS-369 INFORMATION TECHNOLOGY - SCSI SIGNAL MODELING-2 (SSM-2)
ANSI-INCITS-232 INFORMATION TECHNOLOGY - SCSI-2 COMMON ACCESS METHOD TRANSPORT AND SCSI INTERFACE MODULE - REPLACES ANSI X3.232-1996
ANSI-INCITS-270 INFORMATION TECHNOLOGY - SCSI-3 ARCHITECTURE MODEL - REPLACES ANSI X3.270-1996
ANSI-INCITS-306 INFORMATION TECHNOLOGY - SCSI-3 BLOCK COMMANDS (SBC) - REPLACES ANSI NCITS 306-1998
ANSI-INCITS-305 INFORMATION TECHNOLOGY - SCSI-3 ENCLOSURE SERVICES (SES) COMMAND SET - REPLACES ANSI NCITS 305-1998; AMENDMENT 1: 2000
ANSI-INCITS-314 INFORMATION TECHNOLOGY - SCSI-3 MEDIUM CHANGER COMMANDS (SMC) - REPLACES ANSI NCITS 314-1998
ANSI-INCITS-304 INFORMATION TECHNOLOGY - SCSI-3 MULTIMEDIA COMMANDS - REPLACES ANSI X3.304-1997
ANSI-INCITS-301 INFORMATION TECHNOLOGY - SCSI-3 PRIMARY COMMANDS (SPC) - REPLACES ANSI X3.301-1997
ANSI-INCITS-335 INFORMATION TECHNOLOGY - SCSI-3 STREAM COMMANDS (SSC) - REPLACES ANSI NCITS 335-2000
ANSI-INCITS-325 INFORMATION TECHNOLOGY - SERIAL BUS PROTOCOL 2 (SBP-2) - REPLACES ANSI NCITS 325-1998
ANSI-INCITS-293 INFORMATION TECHNOLOGY - SERIAL STORAGE ARCHITECTURE - PHYSICAL LAYER 1 (SSA-PH1) - REPLACES ANSI X3.293-1996
ANSI-INCITS-307 INFORMATION TECHNOLOGY - SERIAL STORAGE ARCHITECTURE - PHYSICAL LAYER 2 (SSA-PH2) - REPLACES ANSI NCITS 307-1997
ANSI-INCITS-294 INFORMATION TECHNOLOGY - SERIAL STORAGE ARCHITECTURE - SCSI-2 PROTOCOL (SSA-S2P) - REPLACES ANSI X3.294-1996
ANSI-INCITS-309 INFORMATION TECHNOLOGY - SERIAL STORAGE ARCHITECTURE - SCSI-3 PROTOCOL (SSA-S3P) - REPLACES ANSI NCITS 309-1997
ANSI-INCITS-295 INFORMATION TECHNOLOGY - SERIAL STORAGE ARCHITECTURE - TRANSPORT LAYER 1 (SSA-TL1) - REPLACES ANSI X3.295-1996
ANSI-INCITS-308 INFORMATION TECHNOLOGY - SERIAL STORAGE ARCHITECTURE - TRANSPORT LAYER 2 (SSA-TL2) - REPLACES ANSI NCITS 308-1997
ANSI-INCITS-296 INFORMATION TECHNOLOGY - SINGLE-BYTE COMMAND CODE SETS CONNECTION (SBCON) ARCHITECTURE - REPLACES ANSI X3.296-1997
ANSI-INCITS-320 INFORMATION TECHNOLOGY - SPATIAL DATA TRANSFER STANDARD (SDTS) - REPLACES ANSI NCITS 320-1998
ANSI-INCITS-244 INFORMATION TECHNOLOGY - TEST METHODS FOR MEDIA CHARACTERISTICS - 90 MM READ ONLY AND REWRITABLE M.O. OPTICAL DISK DATA STORAGE CARTRIDGES WITH CONTINUOUS COMPOSITE SERVO (CCS) - REPLACES ANSI X3.244-1995
ANSI-INCITS-358 INFORMATION TECHNOLOGY - THE BIOAPI SPECIFICATION
ANSI-INCITS-264 INFORMATION TECHNOLOGY - UNRECORDED HELICAL-SCAN DIGITAL COMPUTER TAPE CASSETTE FOR INFORMATION INTERCHANGE 19 MM (0.748 IN) TYPE D-1 - REPLACES ANSI X3.264-1996
ANSI-INCITS-235 INFORMATION TECHNOLOGY - UNRECORDED MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - 0.25 IN (6.35 MM), 10 000-12 500 FTPI (394-492 FTPMM) COERCIVITY 550 OERSTEDS (44 000 AMPERES/METER) (TYPES 6150, 6250, 6037) - REPLACES ANSI X3.235-1995
ANSI-INCITS-251 INFORMATION TECHNOLOGY - UNRECORDED MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - 0.25 IN (6.35 MM), 20 000 FTPI (787 FTPMM) COERCIVITY 550 OERSTEDS (44 000 AMPERES/METER) (TYPES 6320, 6525, 6080, 6081) - REPLACES ANSI X3.251-1995
ANSI-INCITS-249 INFORMATION TECHNOLOGY - UNRECORDED MAGNETIC TAPE MINI-CARTRIDGE FOR INFORMATION INTERCHANGE - 0.25 IN (6.35 MM), 10 000-14 700 FTPI (394-579 FTPMM) COERCIVITY 550 OERSTEDS (44 000 AMPERES/METER) (TYPES 2000, 2060, 2080, 2120) - REPLACES ANSI X3.249-1995
ANSI-INCITS-TR-27 INFORMATION TECHNOLOGY ADDRESS OFFSET RESERVED AREA BOOT METHOD
ANSI-INCITS-361 INFORMATION TECHNOLOGY AT ATTACHMENT WITH PACKET INTERFACE - 6 (ATA/ATAPI-6) - ERRATUM: 6/02/2004
INCITS-361-ERRATUM INFORMATION TECHNOLOGY AT ATTACHMENT WITH PACKET INTERFACE 6 (ATA/ATAPI) - ERRATUM TO ANSI INCITS 361:2002,
ANSI-INCITS-TR-21 INFORMATION TECHNOLOGY ENHANCED BIOS SERVICES FOR DISK DRIVES
ANSI-INCITS-262 INFORMATION TECHNOLOGY FIBER DISTRIBUTED DATA INTERFACE (FDDI) - CONFORMANCE TEST PROTOCOL IMPLEMENTATION CONFORMANCE STATEMENT PROFORMA (CT-PICS) - REPLACES ANSI X3.262-1995
ANSI-INCITS-TR-18 INFORMATION TECHNOLOGY FIBRE CHANNEL - 10-BIT INTERFACE
ANSI-INCITS-TR-26 INFORMATION TECHNOLOGY FIBRE CHANNEL HIGH SPEED PARALLEL INTERFACE
ANSI-INCITS-TR-39 INFORMATION TECHNOLOGY FIBRE CHANNEL METHODOLOGIES FOR INTERCONNECTS - 2 (FC-MI-2)
ANSI-INCITS-TR-30 INFORMATION TECHNOLOGY FIBRE CHANNEL METHODOLOGIES FOR INTERCONNECTS (FC-MI)
ANSI-INCITS-352 INFORMATION TECHNOLOGY FIBRE CHANNEL PHYSICAL INTERFACES (FC-PI)
ANSI-INCITS-269 INFORMATION TECHNOLOGY FIBRE CHANNEL PROTOCOL FOR SCSI - REPLACES ANSI X3.269-1996
ANSI-INCITS-374 INFORMATION TECHNOLOGY FIBRE CHANNEL SINGLE-BYTE COMMAND CODE SETS MAPPING PROTOCOL - 3 (FC-SB-3)
ANSI-INCITS-381 INFORMATION TECHNOLOGY FINGER IMAGE-BASED DATA INTERCHANGE FORMAT
ANSI-INCITS-378 INFORMATION TECHNOLOGY FINGER MINUTIAE FORMAT FOR DATA INTERCHANGE
ANSI-INCITS-377 INFORMATION TECHNOLOGY FINGER PATTERN DATA INTERCHANGE FORMAT
ANSI-INCITS-379 INFORMATION TECHNOLOGY IRIS IMAGE INTERCHANGE FORMAT
ANSI-INCITS-TR-17 INFORMATION TECHNOLOGY NUMERICAL C EXTENSIONS
ANSI-INCITS-TR-22 INFORMATION TECHNOLOGY OBJECT INFORMATION MANAGEMENT OBJECT MODEL TECHNICAL REPORT
ANSI-INCITS-TR-28 INFORMATION TECHNOLOGY SCSI DOMAIN VALIDATION (SDV)
ANSI-INCITS-401 INFORMATION TECHNOLOGY SCSI MULTIMEDIA COMMANDS - 4 (MMC-4)
ANSI-INCITS-TR-29 INFORMATION TECHNOLOGY SCSI SIGNAL MODELING (SSM)
INCITS-369 INFORMATION TECHNOLOGY -SCSI SIGNAL MODELING-2 (SSM-2) - REV 5
ANSI-INCITS-TR-16 INFORMATION TECHNOLOGY SCSI-3 GENERIC PACKETIZED PROTOCOL (SCSI-GPP)
ANSI-INCITS-375 INFORMATION TECHNOLOGY SERIAL BUS PROTOCOL (SBP-3)
ANSI-INCITS-TR-24 INFORMATION TECHNOLOGY TAPE AND TAPE MEDIUM CHANGERS (FC-TAPE)
ANSI-INCITS-TR-14 INFORMATION TECHNOLOGY TECHNICAL REPORT IRDS CONEPTUAL SCHEMA PART 1: CONCEPTUAL SCHEMA FOR IRDS, PART 2: MODELING LANGUAGE ANALYSIS - FORMERLY ANSI X3/TR-14-1995
ANSI-INCITS-34 INTERCHANGE ROLLS OF PERFORATED TAPE FOR INFORMATION INTERCHANGE - REPLACES ANSI X3.34-1972
ANSI/AGMA-6033-B98 MATERIALS FOR MARINE PROPULSION GEARING
ANSI/AGMA-6133-B98 MATERIALS FOR MARINE PROPULSION GEARING - REVISION OF ANSI/AGMA 6033-A88; METRIC EDITION OF ANSI/AGMA 6033-B98
ANSI/AGMA-2114-A98 MEASURING INSTRUMENT CALIBRATION, GEAR PITCH AND RUNOUT MEASUREMENTS
ANSI/AGMA-2113-A97 MEASURING INSTRUMENT CALIBRATION, GEAR TOOTH ALIGNMENT MEASUREMENT
ANSI-Z245.1 MOBILE WASTES AND RECYCLABLE MATERIALS COLLECTION, TRANSPORTATION, AND COMPACTION EQUIPMENT - SAFETY REQUIREMENTS
ANSI-INCITS-207 OFFICE MACHINES AND SUPPLIES - ALPHANUMERIC MACHINES - ALTERNATE KEYBOARD ARRANGEMENT - REPLACES ANSI X3.207-1991
ANSI-INCITS-154 OFFICE MACHINES AND SUPPLIES - ALPHANUMERIC MACHINES - KEYBOARD ARRANGEMENT - REPLACES ANSI X3.154-1988
ANSI-INCITS-150 OFFICE MACHINES AND SUPPLIES - BUSINESS MACHINES, DATA PROCESSING EQUIPMENT, AND BUSINESS FORMS - CHARACTER AND LINE SPACING - REPLACES ANSI X3.150-1987
ANSI-INCITS-151 OFFICE MACHINES AND SUPPLIES - BUSINESS MACHINES, DATA PROCESSING EQUIPMENT, AND BUSINESS FORMS - CHARACTER AND LINE SPACING - REPLACES ANSI X3.151-1987
ANSI-INCITS-152 OFFICE MACHINES AND SUPPLIES - NONCARBONIZED, SINGLE-PLY ADDING MACHINE PAPER ROLLS - SPECIFICATION - REPLACES ANSI X3.151-1987
ANSI-INCITS-18 ONE-INCH PERFORATED PAPER TAPE FOR INFORMATION INTERCHANGE - REPLACES ANSI X3.118-1974
ANSI-INCITS-82 ONE-SIDED SINGLE-DENSITY UNFORMATTED 5.25-INCH FLEXIBLE DISK CARTRIDGE (FOR 3979-BPR USE) - REPLACES X3.82
ANSI-Z80.7 OPHTHALMIC OPTICS - INTRAOCULAR LENSES
ANSI/OLA-Z80.7 OPHTHALMIC OPTICS - INTRAOCULAR LENSES
ANSI-Z80.27 OPHTHALMICS - AQUEOUS SHUNTS FOR GLAUCOMA APPLICATION
ANSI/OLA-Z80.27 OPHTHALMICS - AQUEOUS SHUNTS FOR GLAUCOMA APPLICATION
ANSI/OLA-Z80.20 OPHTHALMICS - CONTACT LENSES - STANDARD TERMINOLOGY, TOLERANCES, MEASUREMENTS AND PHYSICOCHEMICAL PROPERTIES
ANSI-Z80.17 OPHTHALMICS - FOCIMETERS
ANSI/OLA-Z80.17 OPHTHALMICS - FOCIMETERS
ANSI/OLA-Z80.21 OPHTHALMICS - INSTRUMENTS - GENERAL-PURPOSE CLINICAL VISUAL ACUITY CHARTS
ANSI/OLA-Z80.25 OPHTHALMICS - INSTRUMENTS: FUNDAMENTAL REQUIREMENTS AND TEST METHODS
ANSI/OLA-Z80.28 OPHTHALMICS - METHODS FOR REPORTING OPTICAL ABERRATIONS OF EYES
ANSI-Z80.28 OPHTHALMICS - METHODS FOR REPORTING OPTICAL ABERRATIONS OF EYES - EDITORIALLY REVISED MARCH 2006
OLA-Z80.3 OPHTHALMICS - NONPRESCRIPTION SUNGLASSES AND FASHION EYEWEAR - REQUIREMENTS
ANSI/OLA-Z80.1 OPHTHALMICS - PRESCRIPTION OPHTHALMIC LENSES - RECOMMENDATIONS
ANSI-Z80.5 OPHTHALMICS - REQUIREMENTS FOR OPHTHALMIC FRAMES
ANSI-Z80.18 OPHTHALMICS CONTACT LENS CARE PRODUCTS VOCABULARY, PERFORMANCE SPECIFICATIONS AND TEST METHODOLOGY
ANSI-Z80.20 OPHTHALMICS CONTACT LENSES STANDARD TERMINOLOGY, TOLERANCES, MEASUREMENTS AND PHYSICOCHEMICAL PROPERTIES
ANSI-Z80.1 OPHTHALMICS G窃 PRESCRIPTION OPHTHALMIC LENSES G窃 RECOMMENDATIONS
ANSI-Z80.25 OPHTHALMICS INSTRUMENTS - FUNDAMENTAL REQUIREMENTS AND TEST METHODS
ANSI-Z80.3 OPHTHALMICS NONPRESCRIPTION SUNGLASSES AND FASHION EYEWEAR REQUIREMENTS
ANSI-Z80.21 OPHTHALMICS-INSTRUMENTS- GENERAL-PURPOSE CLINICAL VISUAL ACUITY CHARTS
ANSI-Z80.24 OPTHALMIC OPTICS - INFORMATION INTERCHANGE FOR OPHTHALMIC OPTICAL EQUIPMENT
ANSI-Z80.23 OPTHALMICS - CORNEAL TOPOGRAPHY SYSTEMS - STANDARD TERMINOLOGY, REQUIREMENTS
ANSI/OLA-Z80.23 OPTHALMICS - CORNEAL TOPOGRAPHY SYSTEMS - STANDARD TERMINOLOGY, REQUIREMENTS
ANSI-Z80.26 OPTHALMICS - DATA PROCESSING AND INFORMATION INTERCHANGE FOR OPTHALMIC INSTRUMENTS
ANSI/OLA-Z80.26 OPTHALMICS - DATA PROCESSING AND INFORMATION INTERCHANGE FOR OPTHALMIC INSTRUMENTS
ANSI/OLA-Z80.24 OPTHALMICS - INFORMATION INTERCHANGE FOR OPHTHALMIC OPTICAL EQUIPMENT
ANSI-Z80.9 OPTHALMICS DEVICES FOR LOW VISION
ANSI-Z80.10 OPTHALMICS INSTRUMENTS - TONOMETERS
ANSI/OLA-Z80.10 OPTHALMICS INSTRUMENTS - TONOMETERS
ANSI/OLA-Z80.9 OPTHALMICS-OPTICAL DEVICES FOR LOW VISION
ANSI-INCITS-93M OPTICAL CHARACTER RECOGNITION (OCR) CHARACTER POSITIONING - REPLACES X3.93M
ANSI-INCITS-86 OPTICAL CHARACTER RECOGNITION (OCR) INKS - REPLACES X3.86
ANSI-INCITS-72 PARALLEL RECORDED MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 4 TRACK, 0.250 INCH (6.30 MM), 1600 BPI (63 BPMM), PHASE ENCODED - REPLACES ANSI X3.72-1981
ANSI-INCITS-118 PERSONAL IDENTIFICATION NUMBER - PIN PAD - REPLACES ANSI X3.118-1984(R1990)
ANSI/AGMA-6034-B92 PRACTICE FOR ENCLOSED CYLINDRICAL WORMGEAR SPEED REDUCERS AND GEARMOTORS
ANSI-INCITS-198 PROGRAMMING LANGUAGE - FORTRAN - EXTENDED - REPLACES ANSI X3.198-1992
ANSI-INCITS-53 PROGRAMMING LANGUAGE PL/I - FORMERLY ANSI X3.53-1976
ANSI-INCITS-29 PROPERTIES OF UNPUNCHED OILED PAPER PERFORATOR TAPE - REPLACES ANSI X3.29-1971
ANSI/AGMA-2003-B97 RATING THE PITTING RESISTANCE AND BENDING STRENGTH OF GENERATED STRAIGHT BEVEL, ZEROL BEVEL, AND SPIRAL BEVEL GEAR TEETH
ANSI-INCITS-21 RECTANGULAR HOLES IN TWELVE-ROW PUNCHED CARDS
ANSI-INCITS-405 SCSI BLOCK COMMANDS - 2 (SBC-2)
ANSI-INCITS-362 SCSI PARALLEL INTERFACE-4 (SPI-4)
ANSI-INCITS-73 SINGLE-SIDED UNFORMATTED FLEXIBLE DISK CARTRIDGE (FOR 6631-BPR USE) - REPLACES X3.73-1980
ANSI/AGMA-6011-I03 SPECIFICATION FOR HIGH SPEED HELICAL GEAR UNITS
ANSI/AGMA-6006-A03 STANDARD FOR DESIGN AND SPECIFICATION OF GEARBOXES FOR WIND TURBINES - SUPERSEDES AGMA 921-A97
ANSI/AGMA-6109-A00 STANDARD FOR GEARMOTOR, SHAFT MOUNTED AND SCREW CONVEYOR DRIVES - METRIC EDITION; REVISION OF ANSI/AGMA 6019-E89 AND 6021-G89
ANSI/AGMA-6009-A00 STANDARD FOR GEARMOTOR, SHAFT MOUNTED AND SCREW CONVEYOR DRIVES - REVISION OF ANSI/AGMA 6019-E89 AND 6021-G89
ANSI/AGMA-6010-F97 STANDARD FOR SPUR, HELICAL, HERRINGBONE AND BEVEL ENCLOSED DRIVES
ANSI/AGMA-6110-F97 STANDARD FOR SPUR, HELICAL, HERRINGBONE AND BEVEL ENCLOSED DRIVES - METRIC EDITION OF ANSI/AGMA 6010-F97
ANSI/AGMA-900-G00 STYLE MANUAL FOR THE PREPARATION OF STANDARDS, INFORMATION SHEETS AND EDITORIAL MANUALS
ANSI-INCITS-20 TAKE-UP REELS FOR ONE-INCH PERFORATED TAPE FOR INFORMATION INTERCHANGE - REPLACES ANSI X3.20-1967
ANSI/AGMA-1102-A03 TOLERANCE SPECIFICATION FOR GEAR HOBS
ANSI/AGMA-1006-A TOOTH PROPORTIONS FOR PLASTIC GEARS
ANSI/AGMA-1106-A TOOTH PROPORTIONS FOR PLASTIC GEARS - METRIC EDITION OF 1006-A
ANSI-INCITS-76 UNFORMATTED SINGLE-DISK CARTRIDGE (TOP LOADING, 200 TPI, 4400 BPI), GENERAL, PHYSICAL, AND MAGNETIC REQUIREMENTS - REPLACES X3.76-1981
ANSI-INCITS-58 UNRECORDED ELEVEN-DISK PACK - GENERAL, PHYSICAL, AND MAGNETIC REQUIREMENTS - REPLACES X3.58-1977
ANSI-INCITS-46 UNRECORDED MAGNETIC SIX-DISK PACK (GENERAL, PHYSICAL, AND MAGNETIC REQUIREMENTS) - FORMERLY ANSI X3.46-1974
ANSI-INCITS-52 UNRECORDED SINGLE-DISK CARTIDGE (FRONT LOADING, 2200 BPI), GENERAL, PHYSICAL, AND MAGNETIC REQUIREMENTS - FORMERLY ANSI X3.52-1976, DEPARTMENT OF DEFENSE
ANSI-INCITS-89 UNRECORDED SINGLE-DISK, DOUBLE-DENSITY CARTRIDGE (FRONT LOADING, 2200 BPI, 200 TPI), GENERAL, PHYSICAL, AND MAGNETIC REQUIREMENTS - REPLACES X3.89-1981
ANSI-Z245.60 WASTE CONTAINERS - COMPATIBILITY DIMENSIONS